- Industry
- Telecommunication equipment
- Application area
- Assembly and testing lab
- Furnisys systems
- Scitec Workbench, Link Uprighter, Base Cabinets
- Engagement
- Space planning, product configuration and after-sales service
Teleprotection, timing and network products
Situation
The client designs teleprotection systems for power grids, IP/MPLS routers and multiplexers, time and frequency synchronisation equipment, and network monitoring products. Their lab handles product fitment and live testing.
Two people per bench, power everywhere
The challenge
Their enquiry specified an electronic workbench 2 ft 7 in high, 7 ft 1 in long and 3 ft 1 in deep for two people, rated for 50 kg, with electrical connectivity. They asked for a pegboard, bin rail, hooks, screwdriver holder, ESD mat and accessories, wrist strap and ground block, for three to four workstations.
How do you keep the function when the budget moves?
The question
How do you fit an L-shaped assembly and testing layout into a room whose dimensions were not yet known, and then keep it within budget without dropping what the lab needs?
Iterate the layout, protect the function
The Furnisys approach
We first recommended the Flexi Series for its grey finish, hanging drawers and L-configuration. The client did not have room dimensions, so we collected them and prepared 2D and 3D layouts. They chose Flexi workstations with corner tables, Flexi racks and Scitec benches.
When the commercial offer exceeded their budget, we reworked the design using Scitec workstations with Link Uprighters, removed the racks, and kept the L-configuration and the essential accessories.
A. Assembly and testing tables: 4 Scitec + Link Uprighter workstations, L-shaped
- Tool rail with medium slotted hooks for torque wrenches, spanners, wire strippers and crimpers
- Adjustable shelf with undershelf task light for fine soldering and module integration
- Tray assembly and bin rail for ICs, transceivers, RJ45 and fibre connectors
- Screwdriver holder for enclosure assembly
- Horizontal power rail for live testing, power meters and signal generators
- Hanging drawers for calibration equipment and spare parts
- Footrest for long sessions
B. Miscellaneous operations table: 2 base cabinets + Link Uprighter
Single-arm tool rail with hooks, adjustable shelf, undershelf task light, tray assembly, screwdriver holder, horizontal power rail, and base cabinets with five drawers each for components, soldering tools, spares and calibration instruments.
Live testing on top, spares below
How the setup works together
Units under test such as timing servers and teleprotection devices sit on the worktop with test jigs and meters. Cables and manuals go on the shelves, high-value tools and spare boards in the drawers. The operations table handles small assembly and debugging with its own storage below.
What the client received
What the configuration enabled
- An L-shaped lab sized to the actual room, confirmed in 2D and 3D
- Power, light and organised storage at every position
- Essential functions kept while meeting the budget
- After-sales support from Furnisys
Options from the same modules
Furnisys perspective
Because every option is built from standard modules, moving from one configuration to another to meet a budget is a design change, not a fresh start.
Frequently asked questions
What does a telecom equipment testing workstation need?
A power rail for live testing, task lighting for soldering, bin rails for connectors, drawers for calibration tools and spare boards, and ESD protection.
Can a layout be redesigned to meet a budget?
Yes. Here an initial Flexi layout was reworked using Scitec workstations with Link Uprighters, keeping the L-shape and accessories.
Does Furnisys prepare layouts before ordering?
Yes. We gathered room dimensions and shared 2D and 3D layouts so the client could choose with confidence.




