Manufacturing workspaces, built around the application.
Assembly, sub-assembly, rework, inspection, engineering, kitting and maintenance in one continuous operation. Each space places different demands on the bench, the storage and the material flow. We configure one modular system for all of them.

Sound familiar?
Most manufacturing workspace problems show up as lost output, quality escapes and time spent searching.
Stations that bottleneck the line
Loose parts, temporary trays and side tables slow output and cause mix-ups.
Rework that leaks back into production
Unplanned rework areas mix good and rejected items.
Inspection you can't fully trust
Mixed gauges and unstable benches reduce confidence in every reading.
Searching instead of building
Disorganised kitting and tool storage stop the line when parts aren't ready.
Seven application spaces. One configured system.
Choose a space to see its challenges, what we provide and the operational outcome.

Assembly & Electronics Assembly
Assembly and electronics assembly spaces bring components, modules and sub-assemblies together into finished or semi finished products. The same station may need to support general assembly as well as sensitive electronic or medical build work. The workspace therefore needs to be configured around the application protecting sensitive parts, keeping the work surface organised and supporting repeatable handling throughout the shift.
- Uncontrolled Part MovementLoose components and excessive reaching increase the risk of mix-ups and slow production.
- Improvised StagingTemporary trays, side tables and separate staging areas make the process less controlled.
- Hidden ESD RiskStatic damage may not be visible at the bench but can create quality issues later.
- Operator FatigueFixed height worktops can add fatigue and affect consistency over long shifts.
- Scitec workstations for ESD-sensitive assembly
- Pro workbenches for heavy-duty tasks
- Flexi systems for evolving layouts
- Base & overhead storage
- Bin rails & mobile cabinets for easy access
- Controlled Assembly
- Quality Output
- Smooth Material Flow
- Reduced Operator Fatigue

Sub Assembly
Sub assembly areas are where smaller modules are built and prepared before moving to the final assembly line. They allow components to be pre built, staged, checked and transferred in a controlled sequence, making them critical to smoother downstream production especially where products are built in layers, variants or repeated small batches.
- Poor Part VisibilityParts spread across general-purpose surfaces, making completed and pending work harder to identify.
- Unclear StagingMultiple active jobs can create confusion when variants or small batches are being handled.
- Work In Progress ControlWithout defined locations, WIP becomes harder to organise and trace.
- Inefficient Line FeedingPoor staging creates unnecessary handling before components reach the final assembly line.
- Compact sub-assembly workstations
- Flexi systems for changing layouts
- Mobile & base cabinets
- Flow racks for component staging
- Organized WIP control
- Staged Production
- Better Part Control
- Smooth Line Feeding
- Cleaner Workflow

Repair & Rework
Repair and rework areas handle non conforming parts, returned items and corrective work before a product can move forward again. Unlike repetitive production, rework may involve diagnosis, inspection, sorting, repair, retesting and reassembly. The workspace therefore needs to support controlled handling without disrupting the main production flow.
- Mixed PartsGood, rejected and pending items can become difficult to separate in an unplanned workspace.
- Multiple Corrective StepsOpening, inspecting, sorting, repairing, retesting and reassembling may all happen within the same area.
- Slower Corrective WorkAn unsuitable bench or poorly arranged tools can make diagnosis and repair more time-consuming.
- Uncontrolled Return• Organized tool movement
- To ProductionPoor segregation can result in unfinished • Clear storage segregation or unresolved items returning to circulation.
- Heavy-duty Pro workbenches
- Durable, easy-clean worktops
- Mobile cabinets & Link trolleys
- Organized tool movement
- Clear storage segregation .
- Controlled Rework
- Faster Corrective Work
- Clear Identification
- Contained Non Conforming Items

Testing, Inspection & Calibration
Testing, inspection and calibration spaces are the quality checkpoints of manufacturing operations. These areas verify whether parts, assemblies and instruments meet the required standard before they move forward. Depending on the plant, the same area may support dimensional inspection, functional testing, verification checks or calibration of gauges and tools.
- Bench InstabilityAn unstable workspace can affect the consistency and confidence of inspection activity.
- Mixed Instrument StatusDisorganised storage can create confusion between calibrated and uncalibrated instruments.
- Cluttered Work SurfacesTools and gauges competing for workspace slow down inspection activity.
- Traceability GapsPoor organisation can make instruments, test items and documents harder to control.
- Scitec & Pro inspection workstations
- Link workstands for lighter tasks
- Visible, protected instrument storage
- Organized base & mobile cabinets
- Easy tool & instrument movement
- Stable Inspection
- Traceable Measurements
- Clean Handling
- Audit Readiness

R&D & Engineering Labs
R&D and engineering labs support prototyping, design validation, trial builds and technical problem solving across manufacturing environments. These spaces sit between concept and production, so they need to support experimentation without losing control over tools, instruments and evolving layouts. The same lab may support electronics, mechanical samples, product trials or short-run development work.
- Changing ProjectsProjects change, instruments move and the ideal workstation can change with each development phase.
- Fixed LayoutsA rigid workspace may require repeate rebuilding for the next trial or prototype.
- Downtime & ClutterFrequent changes without modular storage can increase downtime and clutter.
- Tool & Instrument ControlPoor storage and cable routing make prototypes and instruments harder to organise.
- Flexi & Scitec Workstations
- Pro & Base Workbenches
- Mobile Storage Cabinets
- Overhead Storage
- Integrated Power Rails
- Flexible Workspace
- Rapid Prototyping
- Sensitive Work Protection
- Adaptable to Project Needs

Parts & Tools Storage & Kitting
Parts, tools and kitting spaces are the control points that support the manufacturing floor. They hold fast moving consumables, picked kits, tools, accessories and small components that need to be issued in the right sequence and returned in a controlled way. Whether supporting a single line or a larger plant, the objective is to keep material moving without losing traceability or time.
- Search TimeOperators waste valuable time looking for the right part, tool or consumable.
- Kit CompletenessPoor organisation makes it harder to verify whether a kit is complete.
- Misplaced PartsSmall components can be mixed between jobs or stored in the wrong location.
- Line StoppagesPoor kitting can prevent the right material from reaching the workstation when required.
- Base & Mobile Cabinets
- Storage Wall Systems
- Flow Racks & Shelf Units
- Issue Counters & Bin Rails
- Secure Lockable Storage
- Organized Storage
- Faster Issue & Retrieval
- Reduced Search Time
- Smooth Line Flow

Maintenance
Maintenance spaces support the ongoing care of plant equipment, production assets, fixtures and support systems across the manufacturing floor. Breakdown response, preventive maintenance, adjustments and routine servicing often happen under time pressure. The workspace needs to be dependable, easy to clean and ready for both planned and unplanned work.
- Heavy Duty WorkMaintenance teams handle heavy components and equipment that demand robust work surfaces.
- Oil & Grease ExposureDirty or fluid-prone jobs require surfaces that can withstand frequent cleaning.
- Tools On The MoveTools move between jobs throughout the day and need to remain organised and accessible.
- Parts & Tool ControlRepair parts, tools in use and items awaiting return need defined locations.
- Heavy-duty Pro workbenches
- Durable SS, PLW & GI worktops
- Mobile cabinets & Link trolleys
- Organized tool & parts storage
- Deciplined Maintenance
- Faster Servicing
- Easy Cleaning
- Better Tool & Parts Control
Fundamentals of manufacturing workspace design.
- Precision
- Electrical protection
- Traceability
- Tool control
- Ergonomics
- Repeatability
- Adaptability
The Furnisys workspace ecosystem.
Work systems, storage systems and accessories designed to work as one.
Work systems
Base Series Industrial Workbench
All purpose workbench series designed to functionally serve your basic workspace needs.

Pro Series Heavy Duty Workbench
An industrial grade workbench series designed to withstand rough work environments.

Scitec Series Technical Workbenches
An adaptable workbench series designed for diverse technical environment.

Flexi Modular Workstation System
Our most flexible workstation — designed to adapt, expand, and reconfigure effortlessly as your workspace needs evolve.
Storage systems

Base Storage Cabinet
"Modular, high-capacity storage built to handle heavy loads" adapts to changing workspaces and demanding storage needs.

Mobile Cabinets
Designed for workflows that require tools and parts on the move, Furnisys mobile cabinets combine storage and mobility in one solution

Link Flow Racks
Experience efficient material handling with LINK Flow Racks—designed to streamline picking, sorting, and assembly processes.

Stands & Trolleys
Configure stands and trolleys to securely hold or transport parts, tools, and test equipment—ideal for use across production, assembly, repair, and maintenance environments.
Go deeper by application.

Electronic Assembly Storage Solutions
Furnisys workstations are engineered to support precise and efficient electronic assembly tasks, whether it…
Explore
Machining and Fabrication Storage Solutions
As cellular manufacturing becomes more common, workers like assemblers, technicians, and engineers require…
Explore
Maintenance and Repair Storage Solutions
For the most challenging maintenance and repair tasks, you need a Furnisys's heavy-duty workbench. Our…
Explore
Medical Manufacturing Storage Solutions
From precision tasks to process control, Furnisys helps you stay productive while meeting the high standards…
ExploreProof from manufacturing floors.

Eight packaging workstations for a bearing manufacturer

An ESD-safe testing lab for medical equipment

Packaging workstation for a tool & die manufacturer
Trusted by manufacturers, laboratories and institutions across industries. See our clientele
Frequently asked questions.
Which standards do manufacturing workspaces need to support?
Most manufacturing spaces work to ISO 9001 process control and traceability. Electronics and medical assembly add IEC 61340-5-1 ESD control, and calibration areas may follow ISO 10012 or ISO/IEC 17025 / NABL-aligned practice. We configure worktops, grounding and storage to support these requirements.
Can one system cover assembly, inspection, maintenance and storage?
Yes. Work systems (Base, Pro, Scitec, Flexi, Link), storage systems (base and mobile cabinets, flow racks, issue counters) and accessories share standard modules, so each space gets its own configuration within one consistent system.
Can the layout change when our products or volumes change?
Yes. Stations are built from standard parts. You can add drawers, power, uprighters or whole bays, or move stations between lines, without replacing what you already have.
Do you plan the layout before manufacturing?
For confirmed projects we carry out a site study and prepare 2D and 3D layouts and a proposal before anything is manufactured.
How we engage.
Share your brief
Scope, application spaces, timelines and any drawings.
Specialist discussion
A workspace specialist reviews the brief with your team.
Site study & layout
For confirmed projects: site study, 2D/3D layout and proposal.
Manufacture & install
Built in Navi Mumbai, installed and supported by our team.
Planning a new line or facility?
Share your project brief. Every brief is reviewed by a workspace specialist who will contact you to discuss scope, layout and next steps.
Application-led design
Every station configured around the process, not a catalogue.
One accountable team
Design, manufacturing and installation from Navi Mumbai.
Built to scale
Standard modules that grow with your lines.
See our latest manufacturing installations on LinkedIn
Follow Furnisys Manufacturing Industry for new projects, application ideas and workspace insights from the manufacturing industry.
