Home / Resources / Case studies Case study · 17 November 2026

Stainless-Steel Workbenches for a Motorcycle Tuning Workshop

A Pro Workbench with a shutter cabinet and a Pro Workstation with a four-drawer base cabinet and pegboard, both with stainless-steel tops and rear back-stops for fork and suspension work.

Heavy-duty workbenches with stainless-steel tops in a motorcycle workshop
Industry
Auto service (motorcycle tuning and maintenance)
Application area
Maintenance and repair
Furnisys systems
Pro Workbench, Pro Workstation, Base Cabinet, Link Uprighter
Engagement
Product configuration and after-sales service

A new workshop for service and performance work

Situation

The client runs a motorcycle service and tuning workshop: routine maintenance, major repairs, performance upgrades and engine overhauls. They were fitting out a newly built workshop.

Fluids, heavy parts and things that roll

The challenge

Benches had to be very sturdy for fork and suspension servicing, with a rigid frame and a top that would not deflect under clamps and vices. The surface needed to resist engine oil, fork oil, brake fluid, coolants and solvents. Tools and components had to be stopped from rolling off the back edge, and the layout needed drawers and cabinets for tools.

How do you build a bench that shrugs off oil and holds its parts?

The question

How do you make a heavy-duty bench that stays clean under constant fluid exposure and keeps small suspension parts from disappearing behind it?

Two Pro configurations with SS tops

The Furnisys approach

1. Pro Workbench with shutter cabinet

The main maintenance platform has a stainless-steel worktop that is non-porous and easy to wipe clean. A heavy-duty frame provides a rigid, low-deflection surface for clamping and presses. A full-width lockable shutter cabinet underneath stores larger parts, solvent containers and consumables, and a rear back-stop stops parts rolling off.

Pro Workbench with stainless-steel top and back-stop
Pro Workbench with stainless-steel top and back-stop

2. Pro Workstation with base cabinet

For fork and suspension service, the same SS top on a robust frame for vices and axle supports. A base cabinet with four partitionable, lockable full-extension drawers on heavy-duty slides. A Link Uprighter with pegboard holds hand tools and suspension tooling, and a rear back-stop keeps parts on the bench.

Pro Workstation with base cabinet, pegboard and back-stop
Pro Workstation with base cabinet, pegboard and back-stop

General service and suspension, side by side

How the setup works together

General maintenance happens on the workbench with bulk consumables in the shutter cabinet. Fork and suspension rebuilds move to the workstation, where small parts are sorted in partitioned drawers and specialist tools hang in view.

What the workshop received

What the configuration enabled

  • Chemical-resistant, easy-clean worktops
  • Rigid structures for clamping, presses and vices
  • Lockable, organised storage for parts, tools and solvents
  • Back-stops that stop parts rolling off during servicing

Small features, real problems

Furnisys perspective

A back-stop is a small detail, but in suspension work it saves time hunting for parts under the bench. See our automotive solutions.

Frequently asked questions

Why use a stainless-steel worktop in a motorcycle workshop?

SS is non-porous and resists engine oil, fork oil, brake fluid, coolants and solvents, so it cleans quickly without staining.

What is a rear back-stop on a workbench?

A raised edge at the back of the worktop that stops tools and small parts from rolling off.

What storage suits suspension servicing?

A base cabinet with partitionable, lockable full-extension drawers for bearings, seals and fasteners.

Have a similar project?

Share your brief and a workspace specialist will configure the right system for it.

Chat on WhatsApp