Home  ›  Resources  ›  Videos  ›  Conceptual learning

Workspace Basics: Conceptual Learning Series

Get familiar with workspace terms and choices through these one-minute concept videos.

Workbench basics

UDL means Uniformly Distributed Load: the weight a worktop can carry when it is spread evenly from end to end. Concentrate the same weight in one spot and the safe limit drops.

Three words people use as if they mean the same thing. Here is what each one includes, and why buying a complete system makes storage, power and material flow fit together.

Three workbench series built for three different jobs. How to match Base, Scitec and Pro to general assembly, labs and heavy-duty work.

What holds up your bench can also hold your tools. When to keep the space open with a leg frame, and when a base cabinet should carry the worktop.

Over a long span, steady weight and vibration can make a worktop bow. A pair of steel rails under the top keeps it flat.

Factory floors are rarely flat. How levelling glides and stud levellers stop a bench rocking and keep measurements true.

Choose the worktop by what touches it. Which surface suits assembly, electronics, labs, wet areas and heavy work.

The most common lab question, answered in one minute: when high-pressure laminate is enough, and when you need stainless steel.

ESD protection

They look alike from across the room but protect different things. A rubber mat protects parts from impact; an ESD mat protects electronics from static.

A spark too small to see or feel can kill or weaken a chip. How static builds up, and why a damaged board can pass today and fail later.

Two ways to make a bench ESD-safe. When to build it into the bench with a PELW worktop, and when a removable mat keeps the bench flexible.

An ESD kit only works if every link is connected. The chain from mat to connector to wrist strap to earth, step by step.

A safe bench is only one layer. How worktops, wrist straps, footwear and flooring work together to protect boards as they move.

Bench accessories

Put every tool on view at the station. How pegboards and holders cut search time and show at a glance what is missing.

One part per bin, at the right height and angle. How bin rails speed up assembly and stop the wrong part being fitted.

Shelves that tilt to face the operator, so bins and boxes are easy to see and reach without stretching or stooping.

Get test instruments off the work surface. The difference between an adjustable riser shelf and an instrument riser.

Replace chained extension boards. Four safe ways to bring power within reach of the operator.

Ceiling lights throw shadows where the work is. Three bench lighting options for assembly, soldering and inspection.

Storage and material flow

Should tools stay in one place or follow the technician? How to choose between fixed and mobile storage.

If you cannot spot a missing tool in two seconds, you do not have tool control. Partitions and foam cut-outs fix that.

Sloped roller shelves that use gravity to bring the oldest stock forward first, so nothing hides at the back.

Bring parts to the line instead of sending operators to the store. How kitting and supply trolleys keep stations running.

Keep every consumable within reach. What a good packing station needs to cut turning, stretching and labelling mistakes.

Ergonomics and lean

One bench height does not suit every task. Guide heights for seated and standing work.

Draw two arcs around your operator. What belongs in the primary zone, what goes in the secondary, and why it matters.

5S starts at one workstation, and with the furniture. How a fixed home for every item keeps clutter from coming back.

Walking, reaching and searching add nothing to the product. How to design motion waste out of a workstation.

Planning and buying

Walk through your new workspace before you buy a single bench. The four inputs and steps from requirement to layout.

Custom sounds like the best fit, but it is slower, costlier and harder to extend. Why a configured solution is usually better.

No videos match your search.

Let's plan the right setup for your team.

Share your space, the work done in it and any drawings you have. We'll suggest a configuration and a layout.

Chat on WhatsApp